HT-1933 Propane / MAP Gas Soldering Torch Head with 3' Hose

HT-1933 Propane / MAP Gas Soldering Torch Head with 3' Hose

 

Question:
Will the flame go down to a hot little precise point for jewelry work?
Answer:
Yes, it will. You can really fine tune the flame on this tool.
By Steve S. on June 11, 2021
Question:
Can i use regularly to braze copper tubing
Answer:
Maybe, if you already have experience using a similar torch with the proper solder. This didn't work for me as the metals I was joining are too small to use a torch with. I wouldn't use this with any small copper items. Even copper fuel lines may be too small. I eventually used a soldering iron and sent the torch back. I suspect that there are better plumber welding tools available for copper tubing brazing. I hope this helps. 
By Lochlan Longstrider on April 2, 2022
I use mine all the time I would have to say yes as long as you have plenty of fuel ⛽️.
By Rick's Auto Repair on April 1, 2022
yes you can
By tommie mcpherson on April 1, 2022
Question:
What all does it include?
Answer:
Just the fittings,hose and iron sold separately
By Levi B. on March 3, 2021
Question:
is the torch itself detachable from the hose? If so what size is the outlet on the hose and is it male or female?
Answer:
It is removable and it male but I do not know the size.
By Rick's Auto Repair on November 4, 2021
Question:
Has anyone managed to find the soldering tip they have in the photos ? I can't seem to find one anywhere online
Answer:
I’m having the same difficulty. The seller told me they are out of stock. I’m looking for something that is made by another brand, that might fit this tool.
It’s a great torch, I’ll still use it on other projects.

By Steve S. on June 11, 2021
Question:
Can you use map gas to solder electronics with the soldering tip? All other products use butane...
Answer:
Yes, I've had great success with this. It also heats up much faster than using an electric iron.
By Levi B. on March 3, 2021
Question:
Is it plastic? The body of this product looks to be plastic.
Answer:
The body is a plastic however I have run this non stop for about an hour with no issues
By C. Hazel on April 30, 2022
The only plastic part is the black adjustment portion. The blue handle portion is aluminum, the tip and shaft is steel, all the internal and external connections are brass with o-rings inside the internal moving parts.
By Aaron Thurman on April 30, 2022
The blue body is metal, the black adjusting knob is plastic.
By Linda on May 1, 2022
Question:
How long?
Answer:
The hose is three feet long.
By Steve S. on June 11, 2021
Question:
What is the size of the jet/flame orifice, you know, the hole the flame comes out of?
Answer:
Its a micro tip that is almost exactly the diameter of a pencil approx. 1/4 inch.
By Geo on January 19, 2021
Question:
Does the basic torch kit come with a mapp tank?
Answer:
No it does not come with any gas tank. You need to supply one.
By LS on April 2, 2022
No.
By Richard on April 2, 2022
Question:
Can I put a long hose ?
Answer:
If your new hose has the correct size fittings.
By Linda on May 1, 2022
Question:
Why can’t this item [bluefire propane / map gas soldering torch head] be shipped to hawaii?
Answer:
The authorities have probably decided that another source of fire isn't necessary when you live that close to a volcano... that's the only way I can make any sense of it.
By Aaron Thurman on April 30, 2022
Due to chemicals. To cut down on the pollution there.
By David T. on July 26, 2022
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.